Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to FUHR 859 Type 3 Lever Operated 2 Hook 2 Roller Multipoint Lock

FUHR 859 Type 3 Lever Operated 2 Hook 2 Roller Multipoint Lock

£121.16

(£100.97 ex VAT)

sku: FUHR-0039
  • FUHR multisafe 859 with two hooks and two rollers, latch and central deadbolt
  • Handle lift engages secondary points; the key extends the central deadbolt
  • 30/35mm backset versions
  • Outside latch release needs the key and matching sprung two-piece spindle
  • Compare exact lock, faceplate, routing and frame-keep positions before replacement
Document Icon FUHR multisafe 859: manufacturer operation, spindle and installation guide

size

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Secured By Design Icon
Latch & Deadbolt

The FUHR 859 Type 3 Lever Operated 2 Hook 2 Roller Multipoint Lock is a lever-operated multisafe 859 lock with two hooks and two rollers, a central latch and a separately secured deadbolt. Available in 30/35mm backsets.

Locking: lift the handle to engage the secondary locking points, then turn the cylinder key to extend the central deadbolt. To open, retract the deadbolt with the key before lowering the handle to release the secondary points. This is manual lever operation, not automatic locking when the door closes.

Split-spindle furniture: the 859 outside lever does not retract the latch; outside latch release needs the key. FUHR specifies its sprung two-piece spindle, with the correct inside/outside orientation and engagement. A generic solid spindle or an offset handle label does not establish equivalent operation. Confirm the spindle length, door thickness and supplied contents.

Replacement fit: compare the exact supplied reference, backset, PZ centres, faceplate, case routing, locking-point positions and matching frame keeps. A shared brand or PZ measurement is not a direct-replacement guarantee. The stored manual explains operation and installation precautions; it is not an exact-part dimensioned drawing.

Dimensions Image: FUHR 859 Type 3 Lever Operated 2 Hook 2 Roller Multipoint Lock
Part Min (mm) Max (mm)
centres 92 -
Backset 30 35
Bolt Length 14 -
Body Length 2170 -
Locking Point Hooks 2 -
Locking Point Roller 2 -
Faceplate Width 16 -

FAQs

Lift the handle to engage the secondary locking points, then turn the key to extend the central deadbolt. Unlock the deadbolt with the key before lowering the handle to release the secondary points. The inside lever retracts the latch; the outside latch requires the key and the correct sprung two-piece FUHR spindle.

Yes, the unit features a reversible latch, allowing it to be configured for both left and right-handed door swings. This makes it a flexible replacement part for various residential uPVC and composite door setups.

This configuration offers a blend of security and performance:

  • The hooks provide high-level security by anchoring the door to the frame to resist forced entry.
  • The roller cams help pull the door tight against the weather seals, improving insulation and preventing drafts.

The 859 inside and outside followers have different latch functions. The outside lever cannot retract the latch; outside latch release needs the key. Use the matching sprung two-piece FUHR spindle, correctly oriented and engaged, rather than assuming that any solid spindle or offset handle set gives the same operation.