Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Aldridge ASGARD Copy Lever Operated Twin Spindle Latch & Hookbolt Gearbox

Aldridge ASGARD Copy Lever Operated Twin Spindle Latch & Hookbolt Gearbox

£52.15

(£43.46 ex VAT)

sku: FIX-0004
  • Copy replacement centre gearbox, not a complete lock
  • Latch and hookbolt
  • Listed twin spindle positions at 92mm and 70mm centres
  • 35mm and 45mm backset options
  • Reversible latch
  • Confirm the original case, fixings and drive connections

size

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Hookbolt

This is an Aldridge Asgard-copy centre case, identified by supplier references EURO 35 92/70 and EURO 45 92/70. It is not described here as a genuine Yale or Asgard manufacturer spare.

Replacement is conditional on matching the original case, hook and latch positions, spindle arrangement, fixing pattern and strip drive. A brand name, backset or similar outline alone does not establish a direct retrofit. Use the operating and latch-handing instructions for the supplied copy case.

Part Min (mm) Max (mm)
Backset 35 45
Case Width 50 -
Case Height 210 -

FAQs

The supplier offers this Asgard-copy case as a replacement type. It is not a blanket direct-fit approval for every Yale or Asgard lock. Compare the exact original case and drive attachments, backset, follower positions and fixing pattern before ordering.

The latch is listed as reversible. Use the instructions for the supplied copy case and check the complete mechanism after fitting; no screw-removal procedure for a different case is assumed.

Twin spindle means this case has two listed follower positions, at 92mm and 70mm centres. Confirm the furniture and inside/outside operation for the matched assembly; two follower positions do not by themselves establish a particular access-control function.

Match the 35mm or 45mm backset, both follower positions, case outline, fixing centres and drive connections with the original. The supplier size description is not an assurance that the case will fit any aluminium door or Asgard strip.