Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to ASEC Kite Screw In Cylinder

ASEC Kite Screw In Cylinder

£60.00

(£50.00 ex VAT)

sku: AS10176

A screw-in cylinder to compliment the Asec Kite range of kitemarked euro double and key & turn cylinders. All cylinders on the Asec Kite range share a profile and therefore can be keyed alike.

  • Complies To BS EN 1303
  • Drill Resistant - Configuration
  • Pick Resistance - Provided by special driver profile
  • Bump Resistant - BKP device fitted as standard.
  • Supplied with 3 keys

These cylinders come either as a single unit or as a keyed alike pair. Each cylinder will be supplied with 3 keys. 3 keys for the single cylinder and 6 keys for the pair.

Notes 27mm of thread
Packaging Visi
Pack Quantity Single
Width 34mm
Depth 39mm
Mechanism 6 Pin
Keys Supplied 3
Finish Nickel Plated
Height 29mm

Key Options

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Secured By Design Icon
Recommended
Heavy Duty
8/10 Security Rating
tick British Standard - BS3621
tick Key Profile: Standard
Dimensions Image: ASEC Kite Screw In Cylinder

Brand

SKU

AS10176

Box Contents

3 keys

rosette

screw in cylinder

Certifications

tick British Standard - BS3621

Key Profile

Key Profile: Standard

FAQs

This is the most important point to get right so you don't leave your home vulnerable to attack. The best way to get the correct size is to remove the cylinder from the door. (see the help page for instructions to do this). Once you have the cylinder out the door you need to measure from one side of the cylinder to the center of the fixing screw hole and then the same from the other side. Make a note of which is the inside measurement and which is the outside. Once you have this you need to match the size to the sizes available online. You want to get this as exact as possible. The cylinder sizes go up in increments of 5mm.

Yes this is possible. We offer the ABUS Pfaffenhain range of padlocks and also we can purchase Euro Cylinder to a Kitemarked level and Rim cylinders which can all be keyed alike or Masterkeyed.

Yes, this is called keyed alike. We build the cylinders for you to match 1 x set of keys. Please note you will only get 1 x set of keys with however many cylinders you order. So if you order 5 x Cylinders keyed alike you will only get 1 x set of keys. We can make you additional keys to match the cylinder at the same time.

Most screw in cylinders are all the same length and thread, you can get extended ones for thicker doors however any of our standard screw in cylinders should suit a standard screw in cylinder lock.

No, these cylinders are just the cylinder only and you must reuse the fixing grub screws from the existing lock.

Related Products

skip to Extra key for ASEC Cylinders

Extra key for ASEC Cylinders

£4.80

(£4.00 ex VAT)

sku: ASEC-KIT-EXK

This additional key for our range of Asec cylinders can be used when ordering any type of cylinder within our Asec range (double, half, thumb turn etc...). !!<

Keys in this section are cut and tested to the cylinders you have purchased in your order. We do not supply uncut blanks unless requested.

>

!!

Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.