Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Avocet 35/92-62 Twin Spindle Replacement Centre Case

Avocet 35/92-62 Twin Spindle Replacement Centre Case

£22.85

(£19.04 ex VAT)

sku: AVSCC
  • Avocet-style aftermarket copy, not identified as an Avocet OEM spare
  • Listed 35mm backset and 92/62mm twin-spindle arrangement
  • Latch-and-deadbolt centre case only
  • Exact donor revision, connections and fixings must be checked
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

The AVSCC Avocet-style copy centre case is a replacement centre component, not a complete multipoint locking strip.

The supplier identifies AVSCC as a copy centre case for newer versions and excludes older versions. The exact donor revision still needs to be matched; Avocet full-lock drawings are not fitting instructions for this aftermarket case.

Match the exact original case and lock generation, backset, spindle arrangement, case outline, drive connections and retaining fixings. Matching the brand or a single measurement does not establish a direct replacement.

A centre-case repair can retain the locking strip only when the replacement is an exact match and the strip, remote locking points and frame keeps remain serviceable. Have the fault and the complete assembled lock checked before assuming that the gearbox alone is sufficient.

Part Size (mm)
Backset 35
Case Width 50
Case Height 218

FAQs

No. The supplier lists AVSCC as an Avocet-style copy for matched newer versions, not every Avocet lock. Match the exact original case and lock generation, backset, spindle arrangement, case outline, drive connections and retaining fixings. Matching the brand or a single measurement does not establish a direct replacement.

Check the handing and latch-reversal instructions for the actual supplied case. Do not use a generic screw-removal procedure or assume that every revision can be reversed in the same way. The copy manufacturer's instructions, rather than an Avocet full-lock drawing, should govern this case.

A centre-case repair can retain the locking strip only when the replacement is an exact match and the strip, remote locking points and frame keeps remain serviceable. Have the fault and the complete assembled lock checked before assuming that the gearbox alone is sufficient.

The listed arrangement has 92mm and 62mm spindle positions. The two spindle positions must be matched to the required handles and operating function. Twin-spindle construction alone does not establish split-spindle operation or guarantee key-only outside entry.