Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to CEGO Surelock Lever Operated Latch & Deadbolt Centre Case - 35/92-70

CEGO Surelock Lever Operated Latch & Deadbolt Centre Case - 35/92-70

£43.91

(£36.59 ex VAT)

sku: 21-05013
  • 21-05013 centre gearbox only
  • Euro-profile latch and deadbolt
  • Listed 35mm backset
  • Listed twin spindle positions at 92mm and 70mm centres
  • Match the original case, fixings and drive attachments
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Deadbolt

This supplier-referenced CEGO Surelock centre case is a repair component for a matching assembly, not a complete locking strip. A replacement requires the exact case reference, outline, cylinder and follower positions, fixing pattern and drive attachments to agree with the original.

The listed 234mm case height and 47mm width do not establish interchangeability by themselves. Check the rest of the mechanism before deciding on a case-only repair and use the operating and latch-handing instructions for the supplied case.

Dimensions Image: CEGO Surelock Lever Operated Latch & Deadbolt Centre Case - 35/92-70
Part Size (mm)
Backset 35
Case Width 47
Case Height 234

FAQs

Match reference 21-05013 and the original case outline, cylinder position, twin followers, fixing pattern and drive connections. The supplier lists 35mm backset and 92/70 centres, but measurements or an unusual cut-out alone do not establish a perfect fit.

Confirm the latch orientation and handing instructions for the supplied 21-05013 case. An internal Y-plate or spring-removal procedure is not established by the captured source and must not be assumed.

The supplier lists two follower positions at 92mm and 70mm centres. Match the furniture and inside/outside operation of the original assembly; twin spindle does not establish compatibility with a wider range of handles.

A case-only repair is possible only after confirming an exact compatible replacement and checking the strip, drive connections and other locking points. The fact that the centre mechanism has failed does not prove that the rest of the lock can be retained.