Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Elite Keywind Latch & Deadbolt 35mm Single Spindle Gearbox Only

Elite Keywind Latch & Deadbolt 35mm Single Spindle Gearbox Only

£74.70

(£62.25 ex VAT)

sku: EDGB45KW
  • Retained reference EDGB45KW
  • Key-wind centre case only
  • Supplier describes a single-spindle latch-and-deadbolt case
  • Backset and exact donor identity require confirmation
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

The Elite EDGB45KW key-wind centre gearbox is a replacement centre component, not a complete multipoint locking strip.

The retained reference is EDGB45KW, while the existing product label and supplier variant description state 35mm. The supplied backset must be confirmed from the actual case or exact original drawing; the code suffix is not measurement proof.

DGS describes key-wind operation on specific complete Elite locks, but an exact spare-case crosswalk and key-turn count have not been established for this reference. Do not substitute an automatic gearbox or assume a two-turn-plus-extra-turn sequence.

Match the exact original case and lock generation, backset, spindle arrangement, case outline, drive connections and retaining fixings. Matching the brand or a single measurement does not establish a direct replacement.

A centre-case repair can retain the locking strip only when the replacement is an exact match and the strip, remote locking points and frame keeps remain serviceable. Have the fault and the complete assembled lock checked before assuming that the gearbox alone is sufficient.

Part Size (mm)
centres 92
Backset 35
Case Width 54
Case Height 200

FAQs

Check the handing and latch-reversal instructions for the actual supplied case. Do not use a generic screw-removal procedure or assume that every revision can be reversed in the same way. Confirm the exact supplied EDGB45KW version before applying a generic reversal procedure.

First confirm the supplied case's identity and backset: EDGB45KW conflicts with the existing 35mm label. Then match the case outline, follower, drive connections and retaining fixings to the original. Do not infer the backset from the code suffix.

DGS describes the key or thumbturn operating the bolts and latch in its complete key-wind locks. The exact turn count for this replacement case is not established. Follow the instructions for the verified donor and supplied gearbox rather than a generic two-turn sequence.

A single spindle or matching PZ measurement does not establish compatibility with most handles. Match the verified gearbox revision, follower, furniture fixings, spindle and intended function to the actual installation.