Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Ferco Lever Operated Single Spindle Latch Only Gearbox

Ferco Lever Operated Single Spindle Latch Only Gearbox

£57.60

(£48.00 ex VAT)

sku: FERCO-0013
  • Compatible with older Ferco multipoint locking systems
  • Available in 28mm or 35mm backset sizes
  • Standard 70mm centres with single spindle operation
  • Easy-to-reverse latch to suit left or right-handed doors
  • Ideal for use on both aluminium and UPVC door types
  • Cost-effective repair solution for failed latch mechanisms

Hand

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

tick Latch Only

The FERCO Lever Operated Single Spindle Latch Only Gearbox is a specialized replacement part designed for older Ferco multipoint locks typically found on aluminium and UPVC doors. This gearbox serves as a cost-effective repair solution, allowing you to restore door functionality when the latch mechanism has failed without needing to replace the entire locking strip.

This unit features a single spindle layout with 70mm centres and is available in either a 28mm or 35mm backset. The compact case design measures 200mm in height and has a width of either 42mm or 48mm depending on the selected backset size. It is fully compatible with Euro profile cylinders and standard 16mm faceplates.

Handing & Operation:
  • Reversible Latch: The latch can be easily reversed to suit door handing by pushing in the latch hold cam on the side of the lockcase with a flat-bladed screwdriver. Remove the latch, flip it, and click it back into place.
  • Locking Method: Lift the lever handle upwards to engage the locking points, then turn the cylinder key one full turn to secure the door.
  • Unlocking: Turn the key one full rotation and push the lever down to release.

Please note this is a latch-only centre case unit and does not include the full locking strip or faceplate.

Part Min (mm) Max (mm)
centres 70 -
Backset 28 35
Case Width 42 48
Case Height 200 -
Faceplate Width 16 -

FAQs

This unit is specifically designed to replace failed centre gearboxes in older Ferco multipoint locking systems. It features standard 70mm centres and is available in 28mm or 35mm backsets. It is ideal for both UPVC and aluminium doors where the faceplate and locking strip are still in good condition.

Yes, the latch is easily reversible to suit both left and right-handed doors. To reverse it, simply push the latch hold cam on the side of the lockcase with a flat-bladed screwdriver, remove the latch, flip it over, and snap it back into place.

You should verify two key measurements: the backset and the centres. This gearbox has standard 70mm centres (the distance between the spindle and the keyhole). It is available in two backset sizes: 28mm or 35mm. Measuring the distance from the front of the faceplate to the centre of the spindle will help you select the correct size.

No, this is the replacement gearbox (centre case) only. It does not include the full-length metal strip or the faceplate. This part is designed to be a cost-effective solution for repairing a door when the internal mechanism has broken but the rest of the strip is still functional.