Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Fix 2025 Lever Operated Scandinavian Profile Multipoint Lock

Fix 2025 Lever Operated Scandinavian Profile Multipoint Lock

£196.15

(£163.46 ex VAT)

sku: FIX-0001
  • Centre latch and deadbolt with two outer hook bolts
  • Scandinavian-profile cylinder required; cylinder supplied separately
  • Left- and right-hand versions with 105mm centres
  • 25mm faceplate

Hand

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Deadbolt

The FIX 2025 uses a lever-operated mechanism with a centre latch and deadbolt and two outer hooks. It is intended for Scandinavian-profile cylinders, rather than a standard Euro-profile cylinder.

Match the handed version, complete strip, hook positions and centre-case dimensions to the existing lock before ordering. Matching the 105mm centres alone does not establish that the replacement will fit.

Dimensions Image: Fix 2025 Lever Operated Scandinavian Profile Multipoint Lock
Part Size (mm)
centres 105
Backset 50
Case Width 72
Case Height 150
Locking Point Hooks 2
Faceplate Width 25

FAQs

It uses a Scandinavian-profile cylinder, supplied separately. A standard Euro-profile cylinder is not a substitute.

Match the full lock reference, handing, faceplate, strip length, hook positions and centre-case dimensions. Also check the 105mm handle-to-cylinder centres; this measurement alone does not establish compatibility.

Lift the handle to engage the outer hooks, then use the key or turnpiece to throw the centre deadbolt and secure the mechanism. Lowering the handle is not the locking step.

No. Check the handed assembly and complete locking-point layout against the existing lock. The cylinder profile and centres are only part of the match.