Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to FUHR Lever Operated Latch & Deadbolt Centre Case

FUHR Lever Operated Latch & Deadbolt Centre Case

£40.67

(£33.89 ex VAT)

sku: FUHR-0016
  • Direct replacement for failed FUHR multipoint lock gearboxes
  • Reversible latch design for easy left or right-handed installation
  • Compatible with UPVC and composite door systems
  • Standard 92mm centres for common hardware compatibility
  • Available in multiple backset sizes from 25mm to 65mm
  • Single spindle operation for lift-lever locking mechanisms

size

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

tick Latch & Deadbolt

The FUHR Lever Operated Latch & Deadbolt Centre Case is a specialized replacement gearbox designed for FUHR multipoint locks, which are widely used on UPVC and composite doors. This centre case offers a cost-effective repair solution, allowing you to replace only the internal mechanism when it fails rather than the entire locking strip. It features a robust latch and deadbolt configuration and a 200mm case height.

This unit is designed for single spindle operation and is available in a variety of backset options (25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, or 65mm) all with a 92mm PZ. The latch is fully reversible; simply locate the Allen screw on the side of the lockcase, remove it, flip the latch, and refit the screw.

  • Operation: Lift lever to engage locks, turn key to secure
  • Centres: 92mm
  • Case Height: 200mm
  • Backsets: Multiple options available

Note: The ball bearing, screw, and spring required for this centre case to operate must be purchased separately (Product Codes: L23669, L23670, and L23671).

Part Min (mm) Max (mm)
centres 92 -
Backset 25 65
Case Width 40 80
Case Height 200 -

FAQs

Yes, the latch is fully reversible, making it suitable for any door handing. To reverse the latch, simply locate the Allen screw on the side of the lockcase, remove it, flip the latch over, and refit the screw.

No, the ball bearing, screw, and spring required for this centre case to operate are not included and must be purchased separately. Please look for product codes L23669, L23670, and L23671 to ensure you have all the components needed for installation.

You should verify the centres and the backset size. This gearbox features standard 92mm centres and is available in various backset sizes ranging from 25mm to 65mm. The backset is the measurement from the front of the faceplate to the centre of the handle spindle.

Yes, this FUHR centre case is designed specifically as a direct replacement for failed internal mechanisms. Replacing only the gearbox is a cost-effective alternative to replacing the entire multipoint locking strip on your UPVC or composite door.