Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Fuhr Lever Operated Latch & Deadbolt Split Spindle Centre Case

Fuhr Lever Operated Latch & Deadbolt Split Spindle Centre Case

£34.37

(£28.64 ex VAT)

sku: FUHR-0029
  • Centre gearbox only
  • Split-follower versions
  • Backsets: 35, 45 and 55mm; listed 92mm PZ
  • Match the exact case, spindle arrangement and locking-strip drive

size

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Deadbolt

The retained supplier references are M9L3528, M9L4528 and M9L5528. Split-follower furniture must match the particular FUHR mechanism and its spindle requirements; lever/lever and lever/pad fittings are not universally interchangeable. Confirm the supplied ancillary parts and latch-handing instructions before fitting.

Dimensions Image: Fuhr Lever Operated Latch & Deadbolt Split Spindle Centre Case
Part Min (mm) Max (mm)
centres 92 -
Backset 35 55
Case Width 50 70
Case Height 200 -

FAQs

35mm, 45mm and 55mm backset versions are retained, listed with 92mm PZ. Match the exact M9L reference, original backset, case outline, fixing positions and drive interfaces.

The latch is listed as reversible. Use the instructions for the supplied case and confirm the latch orientation and free operation after fitting. A procedure for another generation must not be assumed to apply.

Use the furniture and split spindle specified for the exact donor mechanism. FUHR distinguishes single-follower and split-follower systems; a generic lever/pad or lever/lever label is not proof of compatibility.

The supplier lists the centre gearbox only. Confirm the exact supplied ancillary parts and spindle requirements; the source's associated ball-bearing, spring and screw references do not establish that every M9L pack has the same exclusions as an M6L pack.