Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Fullex XL3 2 Hook 4 Roller Single Spindle Lock

Fullex XL3 2 Hook 4 Roller Single Spindle Lock

£60.74

(£50.62 ex VAT)

sku: XL34R6357THS-S
  • Fullex XL THS/S full-unit configuration
  • Supplier-listed two remote hooks, four rollers and two anti-lift bolts
  • Listed 35mm backset and 16mm faceplate
  • Faceplate snib and extension provision require matching parts
  • Confirm the exact follower and complete lock/keep arrangement
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Secured By Design Icon
BS EN 1670:2007

This listing retains the exact supplier reference XL34R6357THS/S, stored under catalogue SKU XL34R6357THS-S. The supplier describes a two-hook, four-roller layout with two anti-lift bolts.

Confirm the follower and spindle arrangement from the supplied part before replacement. The supplier calls this item single spindle, while current non-TH S/S references describe split-spindle models; those references are not an established generation bridge. No single-versus-split operation or universal handle fit is asserted here.

Check whether a complete strip or centre case is required, together with the faceplate, remote positions, snib interface, extensions and handed keeps. Current 7474 one-piece keeps are not established companions for this TH reference. The lock alone does not guarantee weather sealing or PAS 24 compliance of a French-door assembly.

Part Size (mm)
centres 92
Backset 35
Body Length 2200
Case Height 228
Case Depth 47
Locking Point Hooks 2
Locking Point Roller 4
Faceplate Width 16

Brand

SKU

XL34R6357THS-S

Certifications

tick BS EN 1670:2007

FAQs

The supplier describes two remote hooks, four rollers and two anti-lift bolts. Verify the full-strip layout and engagement with the exact keeps. Neither those features nor adding generic shootbolts establishes PAS 24 compliance for the complete doorset.

The supplier lists four rollers. Check their positions and engagement with the existing keeps; any compression adjustment must follow the instructions for the actual unit. A draft-free or weather-tight door is not guaranteed by this lock listing.

The supplier describes top and bottom extension provision, not unrestricted height adjustment. Match the exact TH-generation connections, extensions or shootbolts and permitted fitting limits before replacement.

The supplier lists a snib on the faceplate. Verify its presence and latch interface on the actual THS/S unit, along with the unresolved follower arrangement. Use the supplied-generation operating instructions rather than assuming another XL model's hold-back behaviour.