Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Gatemaster Concealed Drop Bolt

Gatemaster Concealed Drop Bolt

£50.20

(£41.83 ex VAT)

sku: GM-CDD-CDS
  • CDS is for a single gate; CDD is for double gates.
  • Fits suitable box sections larger than 30 × 30mm.
  • 80mm travel.
  • Cut-to-length M10 studding is required and is not included.
  • Check the fitting drawing before fabricating the gate.
Document Icon Current CDD/CDS specification & fitting guide

model

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Secure the leaf. Keep the bolt concealed.

These vertical dropbolts fit inside suitable metal gate box section, leaving an edge-operated handle accessible. CDS is the single-gate version; CDD is intended for double gates.

On the double-gate version, the second leaf prevents the handle being lifted when the gates are closed. Check the drawing for the required operation and gate layout.

drop bolt on gate

Prepare the box section.

The gate section must be larger than 30 × 30mm. Both versions have 80mm travel and require M10 studding cut to the installation length; the studding is not included.

Use the current fitting drawing to position the mechanism and ground fixing. These are metal box-section products, rather than dropbolts to bury in a timber gate.

Specification and fitting guide
Dimensions Image: Gatemaster Concealed Drop Bolt

FAQs

CDD is the double-gate version. CDS is for a single gate. Their operating arrangements differ; check the fitting drawing against the gate layout.

The mechanism uses cut-to-length M10 studding, which is not supplied. Provide studding suited to the required installation length.

The manufacturer specifies suitable box section larger than 30 × 30mm. Travel is 80mm; check the full drawing before preparing the gate.

The supplied mechanism includes the upper and lower bolt parts, upper and lower housings, handle and two grub screws. Cut-to-length M10 studding is required separately.