Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to GU Fercomatic Automatic Latch & Deadbolt Multipoint Lock

GU Fercomatic Automatic Latch & Deadbolt Multipoint Lock

£99.64

(£83.03 ex VAT)

sku: GU-0049
  • Central latch and deadbolt with two roller locking points
  • Single-spindle layout
  • Euro-profile cylinder cut-out
  • Available with 40mm or 50mm backsets
  • 70mm centres and an 18mm faceplate

size

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Deadbolt

The GU Fercomatic is a full-length multipoint lock with a central latch and deadbolt and two roller locking points. The range has a single spindle, 70mm centres and an 18mm faceplate, with 40mm or 50mm backsets.

For a replacement, match the complete reference, centre-case layout, locking-point positions and keeps to the existing door. Check the handle spindle and cylinder dimensions against the supplied lock; matching centres or backset alone does not establish fit.

Dimensions Image: GU Fercomatic Automatic Latch & Deadbolt Multipoint Lock
Part Min (mm) Max (mm)
centres 70 -
Backset 40 50
Body Length 2150 -
Locking Point Roller 2 -
Faceplate Width 18 -

FAQs

This range has a central latch and deadbolt with two roller locking points. Match the complete lock reference and locking-point layout to the existing installation.

Fit depends on the door preparation, faceplate, centre case and matching keeps. For a replacement on a timber or composite door, compare these with the existing hardware; the door material alone does not establish compatibility.

The range has a single-spindle layout, 70mm centres and a Euro-profile cylinder cut-out. Match the follower, spindle and cylinder dimensions to the supplied lock and door before reusing existing furniture.

Check door alignment and the position and condition of the keeps before fitting a replacement. Door or frame defects require separate attention.