Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Kenrick Excalibur Latch & Hookbolt Gearbox 35mm

Kenrick Excalibur Latch & Hookbolt Gearbox 35mm

£45.89

(£38.24 ex VAT)

sku: EXDL33SBPCG
  • Exact listed reference EXDL33SBPCG
  • Single-spindle latch-and-hookbolt centre case
  • Listed 35mm backset and 92mm centres
  • Exact Excalibur donor and spare revision must be matched
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Hookbolt

The Kenrick EXDL33SBPCG centre gearbox is a replacement centre component, not a complete multipoint locking strip.

The supplier lists EXDL33SBPCG as a sprung Excalibur centre case. Kenrick also describes sprung gearboxes at range level, but neither establishes a direct replacement from the EXDL33SBP code stem alone.

Confirm the actual case, follower return, handle requirements, connectors and fixings for the installed lock. A centre-case replacement does not independently certify the repaired doorset.

Match the exact original case and lock generation, backset, spindle arrangement, case outline, drive connections and retaining fixings. Matching the brand or a single measurement does not establish a direct replacement.

A centre-case repair can retain the locking strip only when the replacement is an exact match and the strip, remote locking points and frame keeps remain serviceable. Have the fault and the complete assembled lock checked before assuming that the gearbox alone is sufficient.

Part Size (mm)
centres 92
Backset 35
Case Width 47
Case Height 224

FAQs

Match the exact original case and lock generation, backset, spindle arrangement, case outline, drive connections and retaining fixings. Matching the brand or a single measurement does not establish a direct replacement. The similar EXDL33SBP full-lock reference is a candidate to verify, not an automatic spare-code crosswalk.

Check the handing and latch-reversal instructions for the actual supplied case. Do not use a generic screw-removal procedure or assume that every revision can be reversed in the same way.

Follow the operating instructions for the exact assembled lock, cylinder and handle arrangement. A gearbox description alone does not establish a universal key-turn count or the action of every remote locking point.

A sprung follower assists handle return. The supplier describes this reference as sprung, and Kenrick describes sprung gearboxes in the range. Confirm the actual spare revision and suitable furniture; springing does not guarantee fit, prevent every handle fault or prove reduced wear.