Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Lockmaster Keywind Latch & Deadbolt Single Spindle Gearbox - 45mm Backset

Lockmaster Keywind Latch & Deadbolt Single Spindle Gearbox - 45mm Backset

£51.91

(£43.26 ex VAT)

sku: YLKT-45
  • YLKT-45 keywind latch and deadbolt centre case
  • Listed 45mm backset and 92mm centres
  • Single-follower repair component
  • Keywind operation, separate from lift-lever repair cases
  • Exact donor fixings, connections and furniture must match
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Deadbolt

The Lockmaster YLKT-45 Keywind Gearbox is a latch and deadbolt repair centre case, listed with 45mm backset, 92mm centres and a single follower.

Confirm the original keywind mechanism's exact reference, case fixings, drive connections and furniture before replacement. It is not a universal-footprint Lockmaster gearbox and is not a conversion from a lift-lever case.

Use the operating instructions for the matched complete mechanism. Cylinder-pull and lever furniture can have different latch-retraction arrangements, so a fixed number of key turns or an extra full turn should not be assumed for this repair case.

Confirm latch handing and cylinder/furniture requirements for the supplied revision before fitting. Matching 45mm backset and 92mm centres is only part of the identification process.

Part Size (mm)
centres 92
Backset 45

FAQs

This is the listed keywind repair family, rather than a lift-lever case. Follow the instructions for the matched complete mechanism and furniture; do not assume an extra full key turn retracts the latch or copy the sequence from a different KeyTurn revision.

The latch is listed as reversible. Confirm the orientation and follow the exact supplied case instructions, including any furniture handing requirements.

Check 45mm backset and 92mm centres, then compare the donor keywind reference, case fixings, drive connections and latch/deadbolt layout. These two measurements do not prove a universal Lockmaster footprint.

It is listed as a Euro-profile, single-follower case. Confirm the cylinder and furniture arrangement for the exact donor mechanism. Shared 92mm centres do not establish fit to most handles or approval for changing to cylinder-pull furniture.