Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Lockmaster Slave Lock Gearbox Single Spindle Sprung - 92mm Centres

Lockmaster Slave Lock Gearbox Single Spindle Sprung - 92mm Centres

£44.92

(£37.43 ex VAT)

sku: L34038
  • Single spindle, sprung slave gearbox
  • Listed for the second-opening leaf of French doors
  • Supplied without a latch or central bolt
  • Match the exact gearbox, connections and handle arrangement before replacement
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Slave

This slave gearbox is a component for the secondary door leaf, not a complete lock or a master-door centre case. Check the supplied case against the original, including follower position, fixings, drive connections and handle springing. Backset and centres alone do not establish compatibility.

Use the operating instructions for the complete fitted mechanism and cylinder. A fixed number of key turns cannot be specified from this gearbox listing.

Part Size (mm)
centres 92
Backset 35
Case Width 50
Case Height 228
Case Depth 50

FAQs

It is listed for the second-opening, secondary leaf of a French-door set. Confirm that the existing slave mechanism uses this exact gearbox and matching strip connections; it is not a master-door latch case.

No. This slave gearbox is listed without a latch or central bolt. It must match the secondary leaf's complete mechanism; the absence of a latch does not establish compatibility with other slave locks.

Follow the instructions for the complete fitted slave mechanism, handles and cylinder. Do not assume a fixed number of cylinder turns or operate a replacement until its connections and locking sequence have been checked.

The listing gives 35mm backset and 92mm centres, but these are only part of the identification. Compare the complete case outline, spindle arrangement, fixing positions and drive connections with the original gearbox. Matching backset and centres alone is not proof of fit.