Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Lockmaster Twin Spindle Multipoint Door Lock 2 Hook 2 Anti-Lift 4 Roller

Lockmaster Twin Spindle Multipoint Door Lock 2 Hook 2 Anti-Lift 4 Roller

£85.75

(£71.46 ex VAT)

sku: PL13-2ER-27
  • Two outer hooks, two anti-lift pins and four rollers
  • Centre latch and deadbolt
  • Twin-spindle arrangement requires matching door furniture
  • 16mm faceplate; match the complete route and locking-point positions
  • Retain the exact PL13-2ER-27 generation when matching replacements
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Deadbolt

This PL13-2ER-27 complete unit combines hook-and-pin locking points with four rollers and a centre latch and deadbolt. The supplier reference is also written as PL13 2ER 27.

Match the complete strip, follower arrangement, case, fixings and keep positions to the existing door. Do not treat a similarly named PL13-2ER-19 as an established interchangeable unit, or assume that a split-spindle pack converts its twin-spindle operation.

Dimensions Image: Lockmaster Twin Spindle Multipoint Door Lock 2 Hook 2 Anti-Lift 4 Roller
Part Size (mm)
Backset 35
Case Width 50
Case Height 228
Locking Point Anti Lift 2
Locking Point Roller 4
Faceplate Width 16

FAQs

The twin-spindle centre case must be paired with the correct follower and handle arrangement. It is not a promise that a split-spindle pack will provide nightlatch operation.

The hooks and anti-lift pins engage their matching keeps. Correct fit and the rest of the door assembly remain important; no locking-point arrangement makes a door immune to attack.

Match PL13-2ER-27 to the original mechanism, including case, follower positions, fixings and every locking point. Door material, a 16mm faceplate and a Euro cylinder do not establish compatibility on their own.

The four rollers work with matching keeps to control compression. They should not be presented as a cure for alignment problems, worn seals or draughts.