Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Mila 35/92-70 Twin Spindle Lever Latch & Deadbolt Gearbox

Mila 35/92-70 Twin Spindle Lever Latch & Deadbolt Gearbox

£35.89

(£29.91 ex VAT)

sku: 47201
  • Exact listed reference 47201
  • Latch-and-deadbolt centre gearbox only
  • Listed 35mm backset with 92/70mm spindle positions
  • Distinct from a 92/62mm Master or Lockmaster arrangement
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Deadbolt

The Mila 47201 twin-spindle centre gearbox is a replacement centre component, not a complete multipoint locking strip.

The exact supplier row describes 47201 with 92mm and 70mm spindle positions. Do not replace that identity with 92/62mm dimensions from a Master or Lockmaster lock.

Confirm the legacy donor generation, connector style, retaining fixings and handle function. Similarity to another old Mila case does not approve an offset-to-inline modification or a universal outside-entry function.

Match the exact original case and lock generation, backset, spindle arrangement, case outline, drive connections and retaining fixings. Matching the brand or a single measurement does not establish a direct replacement.

A centre-case repair can retain the locking strip only when the replacement is an exact match and the strip, remote locking points and frame keeps remain serviceable. Have the fault and the complete assembled lock checked before assuming that the gearbox alone is sufficient.

Part Size (mm)
Backset 35
Case Width 50
Case Height 234

FAQs

Check the handing and latch-reversal instructions for the actual supplied case. Do not use a generic screw-removal procedure or assume that every revision can be reversed in the same way.

An older offset connection needs an exact donor and fitting check. Do not assume that an inline replacement is compatible or make a generic drive-slot modification without the approved procedure for the actual case.

The exact supplier row lists two spindle positions at 92mm and 70mm. This is distinct from the 92/62mm arrangements found on other locks. Match the handles and required function; the twin-spindle description alone does not guarantee key-only outside entry.

Match the original retaining fixings and drive connections to the supplied case and its fitting instructions. Do not assume that any self-tapping screw will suit, or modify a drive slot merely because an older connector looks different.