Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Mila 45/92 Lever Operated Latch & Deadbolt Centre Case

Mila 45/92 Lever Operated Latch & Deadbolt Centre Case

£48.17

(£40.14 ex VAT)

sku: GRBX74592
  • 45mm backset and 92mm centres for standard compatibility
  • Cost-effective alternative to replacing entire locking strips
  • Fully reversible latch to suit both left and right-handed doors
  • Lever-operated mechanism for secure deadbolt and latch engagement
  • Durable single spindle design compatible with Euro profile cylinders
  • Designed for trade professionals and DIY door refurbishments
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

tick Latch & Deadbolt

The Mila Lever Operated Latch & Deadbolt Centre Case is a high-quality replacement gearbox designed for the repair and maintenance of multi-point door locking systems. With a 45mm backset and 92mm centres, it offers a cost-effective solution for locksmiths and trade professionals looking to refurbish existing hardware without the expense of a full-length strip replacement.

This centre case features a single spindle operation and is designed for use with Euro profile lock cylinders. The locking method involves lifting the lever to engage the mechanisms, followed by a full turn of the key to secure the deadbolt. Reversing the latch is simple and can be done by removing a single screw, flipping the latch, and refitting it to match the door's handing.

Technical Specifications:

  • Case Height: 234mm
  • Case Width: 50mm
  • Backset: 45mm
  • Centres: 92mm
  • Spindle: Single Spindle

Please Note: The fixing points on this unit are unthreaded and require self-tapping screws. Replacement gearboxes are now supplied with inline connectors; if replacing an older model with an offset connector, some minor adaptation to the drive gear slot may be required during installation.

Part Size (mm)
centres 92
Backset 45
Case Width 50
Case Height 234

FAQs

This Mila centre case is designed with a 45mm backset and 92mm centres. To ensure it is the correct replacement, measure from the centre of the handle spindle to the front of the faceplate for the backset, and from the centre of the spindle to the centre of the key hole for the centres.

Yes, the latch is fully reversible. You can change the orientation by removing a single screw, flipping the latch over, and refitting it to match the handing of your door.

The fixing points on this replacement unit are unthreaded. You will need to use self-tapping screws to secure the gearbox to your existing multi-point locking strip.

This is a lever-operated system. To secure the door, lift the handle upwards to engage the latch and multi-point hooks or bolts, then turn the key to lock the deadbolt in place.