Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Roto H600 2 Hook Multipoint Door Lock

Roto H600 2 Hook Multipoint Door Lock

£104.46

(£87.05 ex VAT)

sku: H600-3RDL2202
  • Lift lever operation to engage the locking hooks and deadbolt
  • Dual hook design provides enhanced security and resistance to forced entry
  • Equipped with a single spindle mechanism for standard lever-lever handle sets
  • Standard 92mm centres compatible with common Euro profile lever handles
  • Integrated latch and central deadbolt for primary security
  • Designed for use on PVCu, timber, or composite door systems
  • Facilitates a full unit replacement for existing H600 series lock mechanisms
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

The Roto H600 is a comprehensive multipoint door lock unit designed to provide high levels of security and reliable operation for residential and commercial entry doors. This specific model features a single spindle configuration, making it compatible with standard lever-lever handle sets where the internal and external handles operate on the same axis.

The mechanism employs two hooks as the primary locking points, which engage with the frame keeps when the handle is lifted. This lift-lever action pulls the door tightly into the frame, improving both security and weather sealing. Once the lever is raised, a single turn of the Euro profile cylinder throws the central deadbolt and deadlocks the entire system. To unlock, one full turn of the key followed by a downward push on the lever retracts all locking points.

This unit is typically used as a direct replacement part for failing or damaged locks in existing PVCu, timber, or composite doors. It features a 35mm backset and 92mm centres, adhering to common industry standards for ease of retrofitting. The 16mm faceplate ensures a clean fit within the door's locking channel, maintaining the structural integrity of the door leaf.

Part Size (mm)
centres 92
Backset 35
Case Width 50
Case Height 212
Locking Point Hooks 2
Faceplate Width 16

FAQs

The Roto H600 uses a lift-lever operation. To lock the door, lift the handle upwards to engage the two hooks and the central deadbolt. Then, turn the key in the Euro profile cylinder to deadlock the entire mechanism. To open the door, turn the key to unlock and push the handle downwards to retract the hooks and latch.

This lock is designed for PVCu, timber, and composite doors. It features a standard 92mm centre measurement, making it compatible with most Euro profile lever-lever handle sets. It uses a single spindle mechanism, meaning the internal and external handles operate on the same axis.

The dual hook design provides enhanced security by firmly anchoring the door leaf into the frame. When the lever is lifted, these hooks pull the door tight, which not only improves resistance against forced entry but also enhances the weather sealing of your door.

To ensure a correct fit for your replacement, please check the following measurements against your current lock:

  • Backset: 35mm
  • Centres: 92mm
  • Faceplate Width: 16mm
  • Locking Type: 2 Hooks, Latch, and Deadbolt