Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Safeware Lever Operated Latch & Hook Gearbox - 35/92-62

Safeware Lever Operated Latch & Hook Gearbox - 35/92-62

£36.50

(£30.42 ex VAT)

sku: SAFEWARE-35-92-62
  • Exact supplier reference SAFEWARE 35 92/62
  • Latch-and-hook centre case only
  • Listed 35mm backset and 92/62mm spindle positions
  • Exact Safeware donor generation and connections must be matched
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Hookbolt

The Safeware twin-spindle latch-and-hook gearbox is a replacement centre component, not a complete multipoint locking strip.

The supplier lists this under reference SAFEWARE 35 92/62. That description is not an exact manufacturer donor list for 7250B, 7251-No-3 or 9770B full locks.

Confirm the actual case, drive connections, retaining screws, followers and handle function. Common branding or measurements do not establish interchangeability with other Safeware or Yale lock generations.

Match the exact original case and lock generation, backset, spindle arrangement, case outline, drive connections and retaining fixings. Matching the brand or a single measurement does not establish a direct replacement.

A centre-case repair can retain the locking strip only when the replacement is an exact match and the strip, remote locking points and frame keeps remain serviceable. Have the fault and the complete assembled lock checked before assuming that the gearbox alone is sufficient.

Part Size (mm)
Backset 35
Case Width 47
Case Height 253

FAQs

Match the exact original case and lock generation, backset, spindle arrangement, case outline, drive connections and retaining fixings. Matching the brand or a single measurement does not establish a direct replacement. The generic SAFEWARE 35 92/62 reference does not confirm a donor crosswalk for every Safeware full lock.

Check the handing and latch-reversal instructions for the actual supplied case. Do not use a generic screw-removal procedure or assume that every revision can be reversed in the same way.

The listed arrangement has 92mm and 62mm spindle positions. The two spindle positions must be matched to the required handles and operating function. Twin-spindle construction alone does not establish split-spindle operation or guarantee key-only outside entry.

A centre-case repair can retain the locking strip only when the replacement is an exact match and the strip, remote locking points and frame keeps remain serviceable. Have the fault and the complete assembled lock checked before assuming that the gearbox alone is sufficient.