Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Winkhaus Lever Operated Latch & Deadbolt Split Spindle Gearbox

Winkhaus Lever Operated Latch & Deadbolt Split Spindle Gearbox

£71.92

(£59.93 ex VAT)

sku: WINKH-0001
  • Centre gearbox only
  • Latch and deadbolt with split-spindle operation
  • 92mm PZ centres
  • 35mm, 45mm and 55mm backset variants

size

Keys Supplied: per lock ( total) total (unless ordering multiple groups)
Additional Keys are available below
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

Latch & Deadbolt

These replacement cases are listed with 92mm centres and three backset sizes. Their respective supplier references are 4941733 (35mm), 4941734 (45mm) and 4941735 (55mm). Replacement depends on matching the original centre case, drive linkage and fixing pattern, not backset and PZ alone.

Part Min (mm) Max (mm)
centres 92 -
Backset 35 55
Case Width 50 70
Case Height 185 -

FAQs

The three cases have supplier-listed 35mm, 45mm or 55mm backsets and 92mm PZ centres. Backset is measured from the faceplate edge to the spindle centre; it is separate from PZ. Case envelope, follower, drive linkage and rivet pattern also have to match the original lock.

The supplier describes a reversible latch. The appropriate reversal method and whole-case application should be confirmed against the exact 4941733, 4941734 or 4941735 replacement reference; riveted construction alone does not identify the correct case.

Use the operating instructions for the exact replacement case and donor lock. The split-spindle arrangement and matching furniture determine the inside and outside latch-release function.

A split follower can separate internal and external handle action when fitted with the correct spindle arrangement. Exterior latch operation depends on the exact lock, spindle and furniture configuration; the split designation is not a universal access-control guarantee.