Call us on: 01323 416426
Search Icon
Funnel Icon

Fetching results ...

Pen Icon

Search for something ...

Sad Face Icon

No results found, try adjusting your search

skip to Yale Lockmaster AutoEngage Heritage Multi-Point Lock

Yale Lockmaster AutoEngage Heritage Multi-Point Lock

£196.24

(£163.53 ex VAT)

sku: YAS1-4503-27
  • Original non-SM YAS1-4503-27 Heritage complete unit
  • Listed 45mm backset and 16mm square-ended faceplate
  • Three security latches with key-retract operation
  • Door closure does not establish that the separate centre deadbolt is locked
  • Furniture and keeps must match the original generation
Qty:

Shipping From:

When ordering multiple Keyed Alike locks, only 1 set of keys are provided as all additional locks are made to work from that key.

If ordering 4 or more keyed alike locks you can have them set up as different groups. If Required: Let us know the details in the "Specific Key Requirements" field above.

Each group of locks will then receive keys.

PAS 24:2016
BS EN 1670:2007 - Grade 4
Latch & Deadbolt

The YAS1-4503-27 is the square-ended AutoEngage Heritage complete lock. Its key-retract mechanism is intended for a correctly matched door and furniture arrangement, rather than any pull handle or heritage-style door.

Security-latch engagement on closure is separate from the centre-deadbolt locking step. Follow the original mechanism's instructions and match its complete geometry and keeps. Newer SMYAS1 smart-prepared references do not establish a replacement for this non-SM unit.

Dimensions Image: Yale Lockmaster AutoEngage Heritage Multi-Point Lock
Part Size (mm)
centres 92
Backset 45
Body Length 2200
Faceplate Width 16

Brand

SKU

YAS1-4503-27

Certifications

tick PAS 24:2016
tick BS EN 1670:2007 - Grade 4

FAQs

The security latches engage on door closure. Use the specified key-locking action for the separate centre deadbolt; do not assume automatic latch engagement completes every locking function.

Heritage styling alone does not establish compatibility. Check the exact case, route, furniture fixings, key-retract operation and keeps; pull handles or knobs need a suitable complete arrangement.

Follow the handing instructions for the original lock and match every handed keep and furniture component. Reversible security latches do not make the whole assembly non-handed.

Use the exact doorset evidence where a security rating is required. Replacing a mechanism does not by itself certify the finished door to PAS 24, and a range-level test claim should not be treated as a rating for every configuration.