What you need. Fitting and setup.
You need a compatible Ajax hub and the detectors or events that will activate the siren. Fit it indoors on a secure surface, check Jeweller reception and configure the alarm volume and indications. No mains, CAT6 or cable back to the hub is required; the batteries are supplied. Only an optional external LED needs a local wire. Test audibility as part of the complete system without prolonged close exposure to the sounder. Use an outdoor-rated siren for an exposed exterior position.
Secure SmartBracket and the holding screw to a sound surface. Ajax recommends a position at least 2.5 metres high, with good radio reception and a location that is difficult to interfere with.