ERA Egress Mortice Sashlock - BS8621
Product Code: ERA234
(£54.00 inc VAT)
(£45.00 ex VAT)
Due to it's durability and quality of design this product has achieved our 'LSW Approved' status, reserved for only the top performing products within their market sector.
High security mortice sashlock with keyless egress for easy exit in emergencies. Supplied complete with 6 pin Euro Cylinder and thumbturn on the inside of the door.
Conforms to the BS 8621:2007 (BS 3621:2007 for escape locks). Meets the demands of insurance companies and the Police
Supplied with Euro Cylinder with thumbturn on the inside of the door. Enables easy exit in emergencies.
20mm bolt throw for additional strength and security
Designed with hardened steel plates to resist drilling and four hardened steel rollers in the deadbolt to resist hacksawing
Bolt through heavy duty security roses protect the cylinder
Easily reversible latch bolt to enable both left and right handed operation
The British Standard (BS) Euro Cylinder Keyless Egress Sashbolt Mortice Door Lock is a BS accredited deadlock in a classic design. This lock conforms to British Standard 8621:2007 which mirrors the BS 3621:2007 but for 'escape locks' and meets the tough criteria/requirements laid down by insurance companies and the police. Locks meeting these requirements are classified as providing keyless egress at all times. This applies where there is a requirement for an easy action method of opening an external door from the inside with no need for keys or similar devices for unlocking. Especially relevant for entrance doors in multi-residential and other buildings. A keyless lever on the inside of the door ensures it is possible to make an emergency escape in an event of fire. The BS Keyless Egress Lock is supplied complete with a 6 pin Euro Cylinder, resistant against picking or drill attacks, with thumbturn on the inside of the door providing the keyless egress for emergencies. Bolt through heavy duty security roses protect the cylinder. High security and strength are delivered by a 20mm bolt throw in every lock. Designed with hardened steel plates to resist drilling and four hardened steel rollers in the deadbolt to resist hacksawing. Features a pull and twist action latch, which can easily reverse the hand of the lock without the removal of the lock cover or screws. Available in 64mm (2 ½") and 76mm (3") in brass effect, satin and a range of chrome effect finishes.
Please note these locks can be KEYED ALIKE. However when the locks are keyed alike the locks that have been altered will lose their BS3621 rating. This is because the cylinders have been altered outside of the factory enviroment. We can offer this service for you though if required. Please get in contact with the team to ask about this. When ordering keyed alike locks you will only receive 1 x set of keys so 3 x keys TOTAL